Skip to main content

kokopelli.ie

Menu

MY CBD

MY CBD

45% FULL SPECTRUM
CO2 EXTRACTED • LAB TESTED

Price: €55
7 ml €55
30 ml €135

MY CBD

45% FULL SPECTRUM
CO2 EXTRACTED • LAB TESTED

Price: €55
7 ml €55
30 ml €135

Full-spectrum means the oil contains **more than just CBD**.

The hemp plant naturally contains many different compounds. CBD is one of them, but
there are also other cannabinoids, terpenes and naturally occurring plant compounds. With
a full-spectrum extract, more of this original profile is kept together in the finished oil.

This is different from **CBD isolate**. With isolate, CBD is separated from most of the other
compounds until what remains is almost entirely CBD.

You may also hear the term **“entourage effect.”** This is the idea that cannabinoids and
other plant compounds may behave differently when they remain together rather than
being completely isolated. Research into this is still developing, so we don't present it as a
proven promise.

Our oil is **45% CBD**, but that doesn't mean the remaining 55% is simply filler. The CBD
sits within a full-spectrum extract containing other naturally occurring components of the
hemp plant.

That's really what full-spectrum means:

**CBD hasn't been separated from everything around it.**

Under the Tongue
Place your measured drops under the tongue.
Hold the oil there for around 1–2 minutes, then swallow. This allows some CBD to be
absorbed through the tissues under the tongue before the remainder is swallowed.

Mixed With Water or Food
CBD oil can also be swallowed or taken with food, but it follows a different route through
the body. It passes through the digestive system and liver before reaching the bloodstream,
so the effect may take longer to appear compared with holding the oil under the tongue.

Dosage
This is a 45% high-strength oil, so start with a small amount.
Start low and increase gradually. Give yourself time to understand how your body responds
before increasing the amount.
Do not exceed the recommended daily amount shown on the product label.

We chose full-spectrum because we didn't want CBD completely separated from the plant it
came from.
Hemp contains more than one cannabinoid. Alongside CBD there are other naturally
occurring cannabinoids, terpenes and plant compounds. Full-spectrum extraction keeps

more of these together instead of refining everything down until mainly isolated CBD
remains.
There is a theory known as the entourage effect. The idea is that these compounds may
interact when they're taken together. Research is still developing, so we don't use that as a
promise or pretend the science is settled.
For us, the choice was simpler.
If we're working with hemp, we would rather keep more of its natural profile than isolate
one compound and remove almost everything around it.
That's why our oil is full-spectrum rather than CBD isolate.

CO₂ extraction sounds complicated, but the idea is actually pretty simple.
Instead of using chemical solvents to pull CBD from the hemp, the process uses carbon
dioxide — the same CO₂ naturally present in the air around us — under carefully controlled
pressure.
Under that pressure, CO₂ behaves differently and can move through the hemp, carrying
cannabinoids and other plant compounds with it. Once the extraction is finished and the
pressure is released, the CO₂ separates from the extract.
That means there is no need to use conventional extraction solvents such as butane or
ethanol to produce our CBD extract.
It's a more controlled way of getting what we want from the hemp without soaking the
plant in solvents and then having to remove them afterwards.
For us, that made sense.
Plant. CO₂. Pressure. Extract.

Every batch is independently tested so we know what's actually in the bottle.
This batch showed 43.29% CBD and 46.27% CBD + CBDA combined. It also contains CBG,
CBC, CBDV, CBN and CBGA, confirming that this isn't CBD isolate but an oil containing a
wider cannabinoid profile.

THC was very low: 0.08% Δ9-THC, with 0.14% total Δ9-THC + THCA reported by the
laboratory.
Total cannabinoids came to 49.71%.
We don't just say it's full-spectrum. The lab report shows what's actually inside.
– 43.29% CBD — out of the oil's weight, about 43% is CBD itself.
– 2.98% CBDA — CBDA is closely related to CBD and is naturally found in the hemp plant.
– When the laboratory combines CBD + CBDA, it gets 46.27%. That's why this is a very
concentrated CBD/CBDA product.
– CBG 2.68% — another cannabinoid naturally found in hemp.
– There are also much smaller amounts of CBC, CBGA, CBDV and CBN. This mixture of
different cannabinoids is part of what demonstrates the broader cannabinoid profile you
expect from a full-spectrum extract, rather than pure CBD isolate.
– THC is present, but at a very low level: 0.08% Δ9-THC.

Our CBD starts on a **farm in Lithuania**, where the hemp used for our oil is grown.

It doesn't travel across the world to be processed somewhere else. After harvest, the hemp
stays in Lithuania, where the CBD is **extracted and the finished oil is made**.

We work with a small Lithuanian producer who has been working with hemp and plant
extracts for years. What mattered to us was that they weren't simply buying bulk CBD
extract and putting their name on a bottle. They are involved with the product from the
plant through to the finished oil.

The hemp is processed using **CO₂ extraction**, which uses controlled pressure and
carbon dioxide to draw the cannabinoids and other compounds from the plant. It allows a
full-spectrum extract to be produced without relying on the kind of solvent extraction used
in some other processes.

The finished oil is **45% full-spectrum CBD** and every batch is laboratory tested.

For us, knowing the country on the label wasn't enough.

We wanted to know **where the hemp was grown and where the oil was actually made.**

With ours, the answer to both is simple:

**Lithuania.**